Soap Drying Rack

I blame Mrs M. Of course.

She had me make her the original Soap Drying Rack when she became a serious Soaper ... and as soon as other Soapers saw the rack, I began to hear a clamor.

If you are a maker, then you know soap needs a drying rack.

These racks have 7 removable, wooden slatted trays to allow for plenty of dry air circulation during the saponification process (I listen when Mrs M speaks!). The footprint of the piece is 23" x 23", and the rack stands about 30" tall. Add the optional 4", locking wheels if this will be on the floor, or no wheels if the Rack will sit on a table or counter.

Shelves are spaced to allow for bars as tall as 3.5". Depending on how large your bars are - and if you dry them flat or on edge - total capacity for each unit is as much as 450 bars.

Buy a 2nd unit to double the storage capacity; units can stack 2 high. With wheels on the bottom unit, total height will be about 64".

Construction is all wood, typically of Poplar & Baltic Birch Plywood. The wood is left raw: this is a soap maker's tool, not a piece of furniture. All surfaces are sanded and splinter-free, but this is not a fine finish.

Each Rack ships in 2 large boxes. There is a minimal amount of assembly required; all holes are pre-drilled and hardware is included. Instructions for the simple assembly are here.

NOTE: this piece is not always in stock, and does take a few days to build. If I'm already committed to other projects, delivery might take a few weeks. Email me first if you're concerned about timing.